Double Glazed Window Repair
It is worth looking into the warranty that comes with most double-glazed windows. It usually covers any problems with window hardware, such as hinges and locking mechanisms in the first 10 years.
The mist that forms between the glass windows is often caused by a crack in the seal and must be fixed quickly to prevent damp or mould from forming in your house.
Condensation Between the Windows
If condensation forms between windows in your home, it's an indicator that the seal holding the gas that insulates between the panes has failed. This could be a major issue that should be addressed immediately especially in winter when humidity is at its highest. This could also cause damage to sills and sealants, as well as mould.
Double-glazed windows shouldn't have condensation between the panes. However, it is not uncommon to have high humidity or an extremely cold snap to cause this problem. Fortunately, this issue is fixable without replacing the entire window. A professional can drill tiny holes into the window and spray special cleaning solution inside. The water is then removed from the window. Additionally, an anti-fogger can be installed to prevent future moisture buildup.
Condensation between windows can also occur due to air leakage, or other factors outside the window. In this scenario it can take a longer time for the moisture inside the window to accumulate, as the air must be warm enough to vaporise the water molecules. In these situations, it is better to replace double-glazed windows instead of trying to repair the sealed units.
A double-glazed windows is made from three or two pieces of insulated glass that are held together by a metal frame. The gap in the middle of the window is filled with a non-toxic insulating gas like argon or Krypton and then sealed. The seal is responsible for stopping the gas that is insulating from escape and also prevents air and moisture from entering into the gap.
As windows age, the seals weaken and allow moisture to leak into the gaps between the glass panes. If the seals begin to leak, it is important to notice this because it indicates that the double glazing is no longer performing as efficiently as it did before. This can result in poor energy efficiency, increased heating costs, a damaged property, and the possibility of condensation between the windows.
Mist
It is perfectly normal to observe condensation on your windows. This indicates that your double glazing system is functioning correctly and is able to maintain the heat inside your home. The condensation forms because the air outside is warmer than the glass and reaches its dew point before the window. This is one of the major advantages of having high-quality double glazing.
If you see condensation on the inside of the window, it could be an indication of a ventilation issue within your home. The excess moisture won't go anywhere else and will end up on the window, carpets furniture, and other parts of your home. This can be prevented by having it examined by an expert and ensuring that there is enough fresh air inside your home.
Another reason why mist appears on double-glazed windows is that the seal between two panes of glass has been broken. This could be due wear and tear or chemical cleaning solutions being used. If this occurs it is best to get the windows repaired as soon as possible.
Having your windows professionally repaired will ensure that they are dry and free of condensation, fogging and misting. It is also a lot less expensive than replacing them all the way through and will also reduce your energy bills.
A FENSA registered window installer will offer a price for repair or replacement of your double glazed windows. Upgrade your old windows to energy efficient ones that are A-rated when they are old.
It is a good idea to retain copies of any warranties and agreements with the window installers. It will be helpful if you encounter any issues with your windows. You can reach out to your window fitters to resolve the issue. This is a much better option than simply not addressing the issue, which will only get worse and could lead to other issues within the home.
Close or open without difficulty
It's not just a nuisance when double-glazed windows can be difficult to open or close. They could also result in more energy costs due to the loss of heat and draughts. It could also be security risks, particularly if the locks don't work properly. It is recommended to fix double-glazed windows and doors as soon as possible.
If you have tried to open your window using the most basic methods, like using a screwdriver or tapping the frame with a solid object, the issue may be more serious. It could be that the window has shifted in its frame and needs to be re-set or it could be that there is gaps between the glass panes and the frames. In either case you should consult a double-glazing repair specialist to ensure the repairs are completed correctly and to prevent further problems.
It's not common for UPVC window handles and lock mechanisms to become difficult to operate or become stuck particularly when they're old and worn. It is usually caused by a build-up of grease or dirt in the handle. This is easily fixed by cleaning it with a uPVC cleanser. If this doesn't help, you could try gently tapping the uPVC frame using a hard object like a screwdriver, being careful not to damage the handle or the mechanism for window handles.
If this does not solve the problem it is likely that the window needs to be replaced since the hinges may not be in the proper position or the locking mechanism could have been damaged. In this situation you should speak to a UPVC window specialist.
repairmywindowsanddoors.co.uk in all technical aspects of double-glazed window and door repair including fixing a jammed or locked shut double glass window. He has a lot of experience in converting old window mechanisms into modern. This could save you money in the replacement of the entire window. Call or email us today for more information or a free estimate.
Warping
Double-glazed windows can be the ideal way to cut down on energy in your home. They are composed of two panes that have a spacer or dense gas in between them. This creates a seal which keeps cold air out and warm air inside. However, over time windows can be damaged or broken and require repair. Fortunately, the majority of repairs are simple and can be accomplished without the expense of replacing the entire window.
One common problem that double-glazed windows encounter is warping. This happens when the windows begin to flex, twist or bow. This can affect the structural integrity and insulating capabilities of the window. Double-glazed windows must be properly installed and maintained to avoid this problem.
If your double-glazed windows are beginning to warp, it is essential to speak with a professional immediately to stop the situation from worsening. They will be able inspect your windows to pinpoint the reason. They will then use specific tools to correct the problem and ensure that your windows are sealed again.
Water vapour is a cause of this issue because it can accumulate between the windows over time. This could be due to many elements, such as the weather, humidity levels and temperature variations. To remedy this the expert will drill a small hole in the window to let out the moisture. They will then apply an agent to clean the glass and then apply an adhesive to protect it from moisture in the future.
In the alternative, if your windows aren't able opened or closed, this could be an indication of a break in the mechanism or hinges. It is worth trying to lubricate these areas of the window prior to calling in a professional, as this can often solve the issue and lessen the necessity for replacements. However, if your windows are old or do not provide the level of insulation that you would like to see it is usually better to replace them.